How to Apply BUYSTICKTILES Wall Decals
Wall decals — also known as decorative vinyl stickers — are a fun, easy, and mess-free way to personalize your space. Whether you're adding charm to a nursery or style to a living room, BUYSTICKTILES wall decals can be applied in minutes and removed cleanly without damaging your walls.
Follow these step-by-step instructions for a flawless application.
🧰 What You’ll Need
- Cloth or sponge
- Tape measure
- Pencil
- Rubber squeegee
🪄 Application Steps
Step 1: Clean the Wall
Ensure the wall is flat, dry, and free of dust or oil. Wipe the surface with a damp cloth or sponge and allow it to dry completely before applying the decal.
Step 2: Plan Your Placement
Measure your wall and determine the exact location for the decal. You can temporarily tape the decal to the wall to preview its position before final application.
Step 3: Align and Mark
With the decal still taped in place, use a level along one edge of the design to ensure proper alignment. Once leveled, mark a light pencil line beneath the decal to help you reposition it accurately after removing the backing.
Step 4: Apply the Decal
Carefully remove the backing and place the decal onto the wall using your guide marks.
If repositioning is needed, gently peel and reapply. Once in place, use a rubber squeegee to smooth the surface and press out any air bubbles.
Step 5: Remove the Protective Layer
Starting from a top corner, slowly peel off the protective front paper at a 45° angle until the entire layer is removed, revealing the finished decal.
💡 Tips for Best Results
- If any part of the decal sticks to the backing paper, dampen a paper towel with water and lightly press on the area — this can help release the decal.
- For optimal adhesion, apply decals in a room with a temperature between 60°F and 80°F (16°C to 27°C). Adjust the room temperature if necessary during installation.