How to Install BUYSTICKTILES Peel and Stick Vinyl Floor Tiles

Transforming your space is easier than ever with BUYSTICKTILES peel and stick vinyl floor tiles — the quickest, cleanest, and most budget-friendly way to refresh any room.

BUYSTICKTILES vinyl floor tile stickers allow you to upgrade worn or damaged flooring in spaces like bedrooms, kitchens, bathrooms, laundry rooms, living rooms, RVs, dining rooms, and basements — all without costly renovations or messy installations. In just a few hours, you can completely change the look of a standard-sized room.

🧰 What You’ll Need

  • Utility knife
  • Metal ruler
  • Pencil
  • Tape measure
  • Chalk line

🔧 Installation Steps

Step 1: Clean the Floor

Ensure the floor is clean, dry, and free of loose debris.

  • Sweep thoroughly and wash the surface with a mild soap solution.
  • Dry the floor completely with a towel to avoid any moisture or particles that could affect adhesion.

Tip: Remove your shoes before drying the floor to keep it as clean as possible.

Step 2: Plan and Cut

Because most walls aren’t perfectly straight, tiles may need slight adjustment at edges.

  • Gently press tiles into the base of the wall.
  • For irregular spaces (e.g., around toilets), use paper templates to trace and cut accordingly.
  • Trim any excess using a utility knife.

Note: Some minor design variations may occur from tile to tile. Rotate pieces as needed to achieve the best visual result.

Step 3: Peel and Stick

  • Begin peeling the backing with one hand, avoiding contact with the adhesive.
  • With your other hand, align and lightly place the tile against the wall seam.
  • Once properly positioned, press down firmly with a plastic smoother for maximum adhesion.
  • Continue placing tiles until the entire area is covered.

Step 4: Finish and Enjoy

Repeat the previous steps until your floor is fully tiled. Step back and enjoy your stunning new space!

⚠️ Important Tips

  • BUYSTICKTILES vinyl floor tiles can also be used on walls and backsplashes. Please refer to the appropriate installation guide.
  • Avoid washing the floor with large amounts of water for the first 48 hours after installation to allow the adhesive to fully set.
  • Do not apply to loose or uneven flooring surfaces.
  • Not recommended for outdoor use, including sunrooms, porches, and garages.
  • For textured or uneven surfaces, a primer adhesive may be required for secure bonding.